• Cables:
  • H.T. (High Tension) XLPE (Cross-Linked Polyethylene) Cable (Single/Three Core) – Up to 33kV
  • H.T. PVC Cable (Single/Three Core) – Up to 33kV
  • H.T. Elastomer Cable (Single/Three Core) – Up to 33kV
• Insulators: Porcelain and Polymer Insulators – 1kV to 33kV
• Current Transformers: Up to 33kV
• Transformers: Distribution/Dry Type Transformers – 1kV to 33kV (5 kVA to 50 kVA)
• Reactors
• Power Capacitors: 1kV to 33kV
• Bus Duct: 1kV to 33kV
• On-Load Tap Changer (OLTC): 1kV to 33kV
• Bushings: Up to 33kV (Suitable Tank with accessories provided by customer)
• Switching Equipment:
  • Air Break Switch – 1kV to 33kV
  • Horn Gap Fuse, Drop Out Fuse – 1kV to 33kV
  • Disconnector (Isolator) and Earth Switch – Up to 1kV to 33kV
• High Voltage Insulation Materials: Up to 1kV to 33kV
  • Cable Boot
  • Ladder
  • Earthing Rod
  • Silicon Rubber Tube
• Circuit Breakers: Up to 1kV to 33kV
• H.T. Rods: Up to 1kV to 33kV

• Porcelain Electrical Insulators (Up to 1 kV to 33 kV): These high-voltage insulators provide electrical isolation and support for conductors in transmission lines.

• Porcelain Post Insulators (Up to 1 kV to 33 kV): Designed for supporting and insulating conductors on transmission line posts or towers, typically for higher voltage systems.

• Indoor Post Insulators (For Systems > 1000V): Made from ceramic or glass, these insulators provide support and insulation for conductors within electrical substations or buildings with high voltage systems.

• Hollow Insulators (Up to 1 kV to 33 kV): Used within electrical equipment for insulation purposes, these insulators may enclose conductors or have internal cavities for specific applications.

• We are equipped to test cables conforming to various national and international standards, including:

  • High-Temperature Electric Wire:
    
    • JSS-51034
    • JSS-51038
  • Low Voltage Cables for Automobiles:
    
    • JIS E 3406
  • PVC Conduit:
    
    • IS: 9537 (P-1) 1980 & 9537 (P-3) 1983
  • Co-Axial Cables (High Frequency):
    
    • JSS-51100
  • Overhead Transmission Conductors:
    
    • IS: 398 (ACSR, AAC, AAAC) with latest amendments (Aluminum Conductor Steel Reinforced, All Aluminum Conductor, All Aluminum Alloy Conductor)
  • General Purpose Power Cables:
    
    • PVC Insulated, PVC Sheathed & Unsheathed Cables (IS: 694 with latest amendment)
    • PVC Insulated, PVC Sheathed (Heavy Duty) Cables (IS: 1554 (Part-1 & 2) with latest amendment)
  • Medium Voltage Power Cables:
    
    • XPLE Insulated, PVC Sheathed (Heavy Duty) Cable (IS: 7098 (Part-1 & 2) with latest amendment)
  • Elastomeric Cables:
    
    • Elastomer Insulated, Elastomer Sheathed Cable (IS: 9968 (Part-1 & 2) with latest amendment)
  • Aerial Bunched Cables:
    
    • Up to and including 1100 V (IS: 14255 with latest amendment)
  • Specialty Cables:
    
    • Motor Vehicle Cables (IS: 2465 with latest amendment)
    • Winding Wire for Submersible Motors (IS: 8783 with latest amendment)
    • Welding Cables (IS: 9857 with latest amendment)
    • Short Firing Cables (IS: 5950 with latest amendment)
    • Fire Retardant Low Smoke, Low Halogen Cables (FR/FRLSH)

• Power Transformers
• Distribution Transformers
• Voltage Transformers
• Current Transformer
• Reactors

• High voltage bushings
• Allied Products
• Line TRAP
• Tap Changer

• Low Voltage (LV) Equipment Testing:

  • Circuit Breakers (ACBs, MCCBs, etc.): Testing functionality of Air Circuit Breakers (ACBs), Molded Case Circuit Breakers (MCCBs), and other LV circuit breakers for overload and short circuit protection.
  • Contactors & Motor Starters: Verification of proper operation for reliable motor control.
  • Household Circuit Breakers & Fuses: Evaluation of domestic circuit breakers and fuses for electrical safety in homes and businesses.
  • Residual Current Devices (RCDs): Testing to ensure proper operation of ground fault protection devices.
  • Switches, Disconnectors, Switch-Disconnectors & Fuse-Combination Units: Verification of functionality for safe electrical system operation and maintenance.
  • Panels, Switchboards & Bus Trunking Systems: Comprehensive testing of integrity and performance of low voltage distribution equipment.

  Medium & High Voltage (MV & HV) Equipment Testing:

  • Circuit Breakers & Metal-Enclosed Switchgear: Testing for safe interruption of high-current faults.
  • Switches: Verification of proper isolation of MV & HV circuits for maintenance and safety.
  • Current Disconnectors & Earthing Switches: Testing of functionality for safe isolation and earthing of MV & HV equipment.
  • Contactors & Motor Starters: Verification of safe and reliable control of high voltage motors.
  • Fuses: Evaluation for proper protection against overcurrents in MV & HV systems.
  • Spacers for Bundle Conductors & Power Connectors: Testing for reliability and safety of overhead transmission line components.
  • Interconnecting Busbar & Busducts: Verification of integrity and performance for efficient power distribution in high voltage systems.

• Panels
• Bus Duct
• Terminal Box

• HV Shunt capacitors
• HV Series capacitors
• HV Series capacitors for surge protection
• LV Motor capacitors
• LV fan motor
• LV capacitors for lighting
• LV power capacitors of self-healing type
• LV shunt capacitors of non-self-healing type

• Transmission line towers & line material
• Vibration damper
• Hardware items fasteners line material, cable lugs, cable connectors, cable clamps etc
• FRP cross arms

• Lightening Arrestors

• Porcelain/Polymer Insulators
• Porcelain Insulators Strings
• Disc / Pin / Long Rod Insulators
• Post, String, Composite Insulators

• Liquid (Transformer Oil)

• Coal analysis, fuel evaluation, analytical modelling & evaluation, xray testing, RLA & NDT, corrosion testing
• Characterization of fly ash, bottom ash, pond ash & solid based utilization
• Solid Insulation Materials (Electrical)
• Solid Insulation Materials (Mechanical)
• Solid Insulation Materials (Electro-chemical)
• Polymers
• Lubricating Oil

• Inverter & PV system components
• LED Lighting system
• Field testing of solar PV plants and street lights
• Street light controllers
• CFL, LED, Self-Ballasted lamp

• Fan – Energy Star rating system
• Fridges and Refrigerators
• Battery Storage
• Room Air Conditioner
• Tubular Fluorescent Lamp
• Compact Fluorescent Lamps

• Boiler and Turbine Components (failure analysis, material composition microstructural analysis)
• Power Connectors
• Earthing Electrodes
• Calibration of Instruments
• Environmental (Automobiles, Medical, ATMs, etc)
• EMI / EMC
• Ingress protection for electrical equipment enclosures, rotating electrical equipment enclosures and luminaries for dust and water.